|
Post by MarlandS on Dec 15, 2011 23:16:29 GMT -5
Too easy...
|
|
|
Post by Rich© on Dec 15, 2011 23:29:50 GMT -5
Dont remove the pump.. Time the pump to the little pointer behind the gear, there is a mark and white paint to highlite it. Line the mark up with the pointer when number 1 piston is set at the proper degrees btdc. Take the three bolts out of the pump gear and use the nut on the pump drive to turn the pump one revolution. Realign the pointer and mark, put the three bolts back in and you have just changed the pump timing by 180 degrees. ;D Guys like Rick deserve a free beer. Good advice.
|
|
RickNCMD
Hired Hand
coon hunter
Posts: 195
|
Post by RickNCMD on Dec 16, 2011 5:20:55 GMT -5
Naah, I spent to much time learning the hard way. I really don't want to set back and watch others do the same. I'm just happy to help.
|
|
RickNCMD
Hired Hand
coon hunter
Posts: 195
|
Post by RickNCMD on Dec 16, 2011 6:30:20 GMT -5
Marland did you look real hard at the damper onthe top of the belt V closest to the timming cover? Those little marks can be very hard to see.
|
|
|
Post by MarlandS on Dec 16, 2011 7:26:51 GMT -5
I had my reading glasses and a strong flashlight , I didn't see anything on the dampener or the housing . Doesn't mean they aren't there though
|
|
|
Post by acfarmer on Dec 16, 2011 9:28:05 GMT -5
I had my reading glasses and a strong flashlight , I didn't see anything on the dampener or the housing . Doesn't mean they aren't there though YOu old farts. I would just scrap that engine and get a real engine. ;D
|
|
|
Post by Gambi80 on Dec 16, 2011 10:35:21 GMT -5
Hey, if my brother can get his 3406E to run with the CAM off by 180*, Maryland should get that binder to run with the pump off 180*. LOL
|
|
RickNCMD
Hired Hand
coon hunter
Posts: 195
|
Post by RickNCMD on Dec 16, 2011 12:37:52 GMT -5
It should be blowin white smoke at 180 off time. BTDT
Is there a pointer on the front cover? Should be on the left front of the cover.
|
|
|
Post by MarlandS on Dec 16, 2011 18:38:28 GMT -5
Nope no pointer . Was barely puffing a little smoke
|
|
|
Post by acfarmer on Dec 16, 2011 18:39:34 GMT -5
Nope no pointer . Was barely puffing a little smoke You got to put fuel in the tank , cheech.
|
|
|
Post by MarlandS on Dec 16, 2011 19:33:39 GMT -5
Nope no pointer . Was barely puffing a little smoke You got to put fuel in the tank , cheech. Crap, I knew there was something I was forgetting.. that would be 94 octane Super unleaded right ?
|
|
|
Post by MarlandS on Dec 16, 2011 19:35:27 GMT -5
Well, after I go clean a couple of bins in the morning , I'll re-time the current boat anchor and use 4-5 cans of ether and see if it'll either blow up or start .
|
|
|
Post by acfarmer on Dec 16, 2011 20:54:55 GMT -5
We can start a pool on here on what will happen. Im betting it will blow up and Marland catches himself on fire. ;D
|
|
RickNCMD
Hired Hand
coon hunter
Posts: 195
|
Post by RickNCMD on Dec 16, 2011 21:04:23 GMT -5
I could have that hussy runnin like a top in under an hour. ;D
|
|
|
Post by 3020 on Dec 16, 2011 21:06:58 GMT -5
We can start a pool on here on what will happen. Im betting it will blow up and Marland catches himself on fire. ;D I did that one time mounting tires.
|
|