|
Post by Rich© on Jul 15, 2011 9:43:43 GMT -5
I've got a 42' field cultivator that I need to replace the sweep shovels on. Ducks foot. Cultivator blades.. Whatever lingo you use for your area.
I cannot remember now what size they are. Seems like 11" to 9" catches them. I have to do some reading to see what factory size it came with. I have noticed that it runs 2 if not 3 different sizes and I have to wonder if that was from the factory or from the farmer that sold it.
It's a "Kent" brand.
Shoup or Sloan the best way to go on this?
Thanks.
|
|
|
Post by Gambi80 on Jul 15, 2011 13:38:02 GMT -5
They could be. Every so often a local dealer 'here' runs a special on stuff like that and we'll stock up from there.
|
|
|
Post by olwhda on Jul 17, 2011 17:40:55 GMT -5
Don't know the cheapest place to buy them, BUT I have a Krause Landstar that uses 12" on the 2 front rows, and 10" on the rest of the shovels, and the only place I can find the 12 inch is Schwartzrock Imp(Biking across America) Charles City IA, they sameday ship UPS. I am using some of the Marathon I from Shoup, they are good so far.
|
|
|
Post by pofarmer on Jul 17, 2011 22:41:11 GMT -5
Generally, our Caseih dealer runs a spring special, and they are about as reasonable as anybody.
|
|
|
Post by Rich© on Jul 18, 2011 0:47:36 GMT -5
Po.. are the case ones the earth metal logo made just like thier disc blades? I be honest, I have never been impressed with the durability and life of thier "earth metal" products. Seems like they wear out prematurely from what I am accustomed to.
|
|
|
Post by pofarmer on Jul 18, 2011 10:30:24 GMT -5
Rich, I assume they are Earth Metal, not for sure though. Thing about Earth Metal "here" is they don't break if you hit a rock. i've seen cheaper ones shatter. Have generally been happy with wear, although on 2010 stuff wore like crazy, but everybody was complaining about it. Seemed back to normal this year. Are you guys really sandy?
|
|
|
Post by Rich© on Jul 18, 2011 12:35:11 GMT -5
Couple bottoms are sand loams but I wouldn't call them sandy at all. We have gumbo places too. Quite the spread and variety of soil types in this area.
Rocks are not an issue. Few places in the hills over west that the limestone and chalk rock pertrude through but that is not my responsibility anymore so I'm real fortunate with the rock situation now.
|
|
|
Post by cornandbeef on Jul 18, 2011 12:41:37 GMT -5
Shoups are made in America not sure about sloans.
|
|
|
Post by Rich© on Jul 18, 2011 13:47:20 GMT -5
I hate to say it but price and longevity is going to dictate what I purchase moreso then where its made.
I frequent walmart. That tells you how devoted and astout I am to American only products.
|
|
|
Post by rlfarmer on Jul 19, 2011 19:19:23 GMT -5
Try Orscheln.
|
|
Jon S
4-H er
Master Beaver Cleaver
Posts: 37
|
Post by Jon S on Jul 19, 2011 20:50:26 GMT -5
|
|
|
Post by Rich© on Jul 19, 2011 23:56:06 GMT -5
Got orschelns before... decent but have a stigma about thier blades for some reason.
|
|
|
Post by Hobbyfarmer on Jul 20, 2011 8:05:14 GMT -5
I've got a deere 980 and only get two seasons out of Deere sweeps 12". I am going to try shoup next time. I put CNH earth metal blades on a Deere disc years ago and they were/are better than the Deere stuff of the same time frame.
|
|
ks8780
4-H er
Just a stone's throw from Dr. Love
Posts: 24
|
Post by ks8780 on Jul 29, 2011 18:10:03 GMT -5
I've ran the CNH shovels on a Kent and Sunflower and I'm done with those POS. Always splitting vertically betwen the bolt hole and falling off. I don't know if I've wore one out yet but have replaced many. Local dealer said they have to put washers between the shovel and shank to stop this. I say bull%$#&. build the shovel right in the first place.
I've been replacing them with Deere shovels and they seem to be working allright.
|
|
|
Post by clayknob on Jul 29, 2011 21:31:01 GMT -5
We run case-ih sweeps, never have had a cracking problem but we pull slower than most too. Nichols are cheap, and they make the sweeps for case-ih. Nichols label is usually 1-2 cheaper.
|
|