mx 100 powershift problems

[nailwhacker]

When i shift it up into the 2nd shift it won't shift then when i shift it to the 3rd powershift it will jump right to 4th?
I've switched solenoids and the relays around and it hasn't changed anything.
What gets me is that it won't do it all the time but seems it will work whenever it damn well pleases.
Next place to look is the handle i guess but for 300 bucks i want to make sure.

Has anyone ran into this ? And what was your outcome?

Thanks Brian

[Dave-ECIA]

Never ran into that problem exactly, but mine will skip from 2-3 and 3-4 if you push the thumb slide (button, whatever you call it) just past the detent for those gears. It only takes a very small move past to make it happen. I just figured it was a issue with the mechanics in the handle.

Mine is a '00 MX120 if it makes a difference, but they should be all the same.

[nailwhacker]

After checking everything again that has to do with the powershift i bit the bullet and put a new handle on it.
So far so good .

Thanks for the feed back Dave.